Philips Blu-ray Surround Base HTB3525B 2.1 CH Integrated subwoofer Bluetooth® and NFC HDMI ARC Blu-ray Disc playback - Manual (Page 15)

13
English
EN
• Make the necessary connections described
in quick start guide, and then switch the
TV to the correct source for your Blu-ray
Surround Base .
Set up the wired network
What you need
• A network cable (RJ45 straight cable).
• A network router (with DHCP enabled).
1
Using a network cable, connect the
ETHERNET connector on your Blu-ray
Surround Base to the network router.
2
Press .
3
Select [Setup], and then press OK.
4
Select [Network] > [Network
installation] > [Wired (Ethernet)].
5
Follow the onscreen instructions to
complete the setup.
• If connection fails, select [Retry], and
then press OK.
6
Select [Finish], and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
network settings].
Set up the wireless network
ETHERNET
ETHERNET www
Your Blu-ray Surround Base has a built-in Wi-Fi
for easy access to a wireless network.
What you need
• A network router (with DHCP enabled).
For best wireless performance, coverage,
and compatibility, use 802.11n router.
1
Press .
2
Select [Setup], and then press OK.
3
Select [Network] > [Network
installation] > [Wireless (Wi-Fi)], and
then press OK.
4
Follow the onscreen instructions to select
and set up the wireless network.
• If connection fails, select [Retry], and
then press OK.
5
Select [Finish], and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
wireless settings].
Personalize the network name
Name your Blu-ray Surround Base to easily
identify it on your home network.
1
Press .
2
Select [Setup], and then press OK.
3
Select [Network] > [Name your
Product:].
4
Press the Alphanumeric buttons to enter
the name.
5
Select [Done], and then press OK to exit.
www