Brother DCP-8020 - Manual (Page 47)

44
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 2 - 5.
1
Make sure that the NC-9100h (Network
Print/Fax Server) is installed into the DCP.
(See Optional accessories in Chapter 15 of
the User's Guide.)
2
Switch off and unplug the DCP from the AC
outlet and disconnect it from your Macintosh
if you already connected an interface cable.
3
Turn on your Macintosh
®
.
4
Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
5
Double-click the Start Here OS X folder to
install the printer driver. If the language
screen appears, select your language.
6
Click Install next to the MFL-Pro Suite.
7
Select Network Interface, and then click
Install.
8
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
9
Turn on the DCP by plugging in the power
cord. Turn the Power Switch on.
0
Select Applications from the Go menu.
For Network Interface Cable Users
For Mac
®
OS X 10.1/10.2.1 or greater
Step 2