Brother XL-3500 - Manual (Page 43)

41
5
OPTIONAL ACCESSORIES
Using the Walking Foot
This foot is very useful for sewing materials such as
vinyl cloth, synthetic leather, thin leather, etc. These
materials are difficult to feed when sewing. The
walking foot prevents these materials from
crumpling, slipping or sticking between the presser
foot and the material.
Note
● Only use the walking foot with straight or
zigzag stitches. Do not use other patterns.
Reverse stitches can not be sewn with the
walking foot.
1
Remove the power supply plug from the
outlet.
2
Raise the needle and the presser foot.
3
Loosen the presser foot screw to remove the
presser foot holder.
1 Screwdriver
2 Presser foot holder
3 Presser foot screw
4
Attach the forked section of the connecting
lever to the needle clamp, and fit the walking
foot to the presser bar.
1 Forked part of operation lever
2 Presser bar holder
3 Needle clamp
5
Lower the presser foot lever and then tighten
the presser foot screw.
1 Presser foot screw
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Straight Stitch
1-4
(1/16-3/16)
2-3
(1/16-1/8)
Zigzag Stitch
1-4
(1/16-3/16)
0-5
(0-3/16)
1 3
2
1
2
3
1
XL2600.book Page 41 Thursday, November 4, 2004 9:46 PM