Brother XL-3500 - Manual (Page 12)

KNOWING YOUR SEWING MACHINE ——————————————————————————————————————————————
10
3
Put a different presser foot on the needle plate
so that the bar on the presser foot is in line
with the slot on the shank.
4
Lower the presser foot lever and fix the
presser foot onto the shank. If the presser foot
is in the correct place, the bar should snap in.
1 Shank
■ Presser Foot Installation Orientation
Flat Bed Attachment
The accessories are stored in a compartment inside
the flat bed attachment.
1
Slide the flat bed attachment to the left to
open it.
1 Flat bed attachment
2 Storage compartment
Note
● Put the accessories inside a bag, and then
store the bag inside the compartment. If the
accessories are not in a bag, they may fall
out and be lost or damaged.
Using a Free-arm Style
Free-arm sewing is convenient for sewing tubular
and hard-to-reach areas. To change your machine to
the free-arm style, lift out the flat bed attachment.
1
Slide the flat bed attachment to the left to
release it.
1 Flat bed attachment
● If the presser foot is not installed with the
correct orientation, the needle may strike
the presser foot, which may bend or
break the needle and cause injury.
1
CAUTION
1
2
1
XL2600.book Page 10 Thursday, November 4, 2004 9:46 PM