Brother XL-3500 - Manual (Page 42)

USING ATTACHMENTS AND APPLICATIONS ———————————————————————————————————————————
40
7
Grip the hoop with your thumbs and
forefingers while pressing the fabric with your
middle and third fingers and supporting the
outside of the hoop with your little fingers.
■ Monogramming
1
Sew by moving the hoop slowly along the
lettering at a constant speed.
2
Secure with a few straight stitches at the end
of the last letter.
■ Embroidering
1
Stitch the outline of the design by moving the
embroidery hoop.
2
Fill in the design alternating from the outline
of the design to the inside and from the inside
to the edge of the outline until the design is
completely filled in. Keep the stitching close
together.
Memo
● You can make long stitches by moving the
embroidery hoop rapidly and short stitches
by moving it slowly.
3
Secure with a few straight stitches at the end
of the design.
● Keep fingers away from moving parts,
especially needles.
● Keep fingers away from moving parts,
especially needles.
CAUTION
CAUTION
● Keep fingers away from moving parts,
especially needles.
CAUTION
XL2600.book Page 40 Thursday, November 4, 2004 9:46 PM