Brother 2340CV - Manual (Page 17)

15
ENGLISH
V. Sewing
Sewing flat fabric (for example, trial sewing)
(1) Raise the presser foot, and then place the fabric at the
needle drop position.
A
Removing the fabric from the machine
(2) Raise the presser foot.
NOTE:
When starting to sew or after changing the thread, in order
for the needle thread to be on top of the presser foot, sew
with it positioned under the presser foot when you begin
sewing. If necessary, turn the handwheel toward you a few
times by hand, and then cut the thread as shown in the
illustration.
(1) By hand, turn the handwheel toward you until the
needle is at its highest position.
A This is where the needle is at its highest position.
(2) Lower the presser foot, turn the handwheel toward you
a few times by hand, and then lightly step on the foot
controller to start sewing.
(1)
(2)
NOTE
(1)
(2)