Brother 2340CV - Manual (Page 14)

12
Two needles three threads cover stitch
Use three threads, two front needles and the looper
thread to sew a 6 mm (15/64 inch) or 3 mm (1/8 inch)
cover stitch.
Use: Ideal for hemming and for decorative stitching.
Needles and threading
• For details on installing and removing the needle,
refer to “Needle” on page 7.
1 Left needle
2 Right needle
IMPORTANT!!
Lightly tighten the screw at the unused needle
position, so it does not fall out while sewing.
• For details on threading the machine, refer to “III.
Threading” on page 9 to 10.
< Threading the left and right needle >
< Threading the looper >
6 mm (15/64 inch) (Wide)
3 mm (1/8 inch) (Narrow)
1 2
A
3 4
A
Needles and threading
• For details on installing and removing the needle,
refer to “Needle” on page 7.
3 Left needle
4 Center needle
IMPORTANT!!
Lightly tighten the screw at the unused needle
position, so it does not fall out while sewing.
• For details on threading the machine, refer to “III.
Threading” on page 9 to 10.
< Threading the left and center needle >
< Threading the looper >