Brother 2340CV - Manual (Page 10)

8
II. Preparation before threading
4
1
2
3
Raise the telescoping thread tree to its highest position.
Make sure that the thread holders are in alignment above
the spool pins as illustrated left.
1 Thread holder on thread tree
2 Spool pin
3 Spool cushion
4 Correct position
Thread spool
The procedure for placing the spool of thread on the spool pin differs according to the shape of the spool.
3
If you are sewing with loosely
spun nylon thread, we recom-
mend that you cover the spool
with the net supplied to prevent
the thread from slipping off the
spool.
Adapt the net to the shape of the
spool.
1 Spool support
2 Spool cushion
3 Net
1 Spool support
2 Spool mat
3 Spool cap
Type A Type B
Thread tree
1
2
1
2
3
(1)
(2)
(1) Turn off the main power switch for safety.
Needle position
(2) Set the needle bar in its highest position by turning the
handwheel toward you.
Turn the handwheel to find the easiest position for
threading.