Philips DV910VHS98 - Manual (Page 28)

POWER
MARKER
TIMER SET VCR/TV MEMORY SPEED
REC
/OTR
OUTPUT SELECT
3
4 5 6
7 8 9
ZOOM
TIME SEARCH
SLOW
STATUS/EXIT
SEARCH MODE
DISPLAY
0 +10
2 1
VCR DVD
E
B
OK
D
H / L K / G
C
CLEAR
REPEAT
SETUP
MENU TITLE
RETURN MODE
SKIP/CHANNEL CHANNEL/SKIP
A-B
AUDIO ANGLE SUBTITLE
F
TIMER SET Button
Press to put the DVD/VCR in standby mode so a timer
recording can occur. Details are on pages 36-38.
SUBTITLE Button
For a DVD, press to select a language for the subtitles (among
those available) or to turn off the subtitles. Details are on page 65.
28 Remote Control Buttons
POWER Button
Press to turn the power on and off. “P-ON” appears briefly on the
display panel as the DVD/VCR turns on. “P-OFF” appears briefly as
the DVD/VCR turns off. Details are on page 24.
DVD Button
Press before using the remote control for DVD features.
• To use the remote control to operate the DVD player and its features, press the DVD button on the remote control
before pressing other DVD buttons. Make sure the DVD/VCR is in DVD mode by pressing the OUTPUT SELECT but-
ton so that the red DVD OUTPUT light appears on the front of the DVD/VCR.
• To use the remote control to operate the VCR and its features, press the VCR button on the remote control before
pressing other VCR buttons. Make sure the DVD/VCR is in VCR mode by pressing the OUTPUT SELECT button so
that the green VCR OUTPUT light appears on the front of the DVD/VCR.
Helpful Hints
Arrow Buttons
Press to select an item in the DVD Player Setup
menu or in the DVD Disc menu.
OK Button
Press to confirm a setting or select an item in the
DVD Player Setup menu or DVD Disc menu.
Fast Forward g Button
DVD mode ●
Press to fast forward the Disc. Details are on page 54.
Press the Pause k button, then press the Fast Forward g but-
ton to begin slow motion playback. Press the Fast Forward g
button repeatedly to change the forward speed of slow motion.
Details are on page 55.
VCR mode ●
When playback is stopped, press to fast forward the tape at high
speed. During playback, press to fast forward the tape while the
picture stays on the screen. Details are on page 44. Press to
advance to the next VCR menu or to change the setting of an item
in the VCR menu.
DISPLAY/STATUS/EXIT Button
DVD mode ●
Press to access or remove the display screen during DVD or
Audio CD playback. Details are on pages 69-70.
VCR mode ●
Press to access or remove the VCR’s on-screen status display.
Details are on page 23. Press to exit on-screen VCR menus.
DV910(H9100).QX33 01.8.9 10:26 AM Page 28