Philips DV910VHS98 - Manual (Page 19)

POWER
MARKER
TIMER SET VCR/TV MEMORY SPEED
REC
/OTR
OUTPUT SELECT
3
4 5 6
7 8 9
ZOOM
TIME SEARCH
SLOW
STATUS/EXIT
SEARCH MODE
DISPLAY
0 +10
2 1
VCR DVD
E
B
OK
D
H / L K / G
C
CLEAR
REPEAT
SETUP
MENU TITLE
RETURN MODE
SKIP/CHANNEL CHANNEL/SKIP
A-B
AUDIO ANGLE SUBTITLE
F
Automatic Channel Setup (cont’d) 19
Reviewing Memorized Channels
To see which TV channels the DVD/VCR has memorized, follow the
steps below.
● Before you begin, place the DVD/VCR in VCR mode. Press the
OUTPUT SELECT button so that the green VCR OUTPUT light
appears on the front of the DVD/VCR. Press the VCR/TV button
so that the VCR/TV light appears on the front of the DVD/VCR.
3
Press the Play B button or the Stop C button to select CH
MEMORY REVIEW, then press the Fast Forward g but-
ton. A list of memorized channels will appear on the screen.
● If all the memorized channels don’t fit on the screen, press the
Fast Forward g button to see the remaining channels.Then
press the Rewind h button to return to the first screen of
channels.
● If you do not press any buttons within 10 seconds, you will either
go to the next screen of channels or you will return to the previ-
ous menu.
4
Press the DISPLAY/STATUS/EXIT button once or twice
to exit.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the Play B button or the Stop C button to select
TUNER SET UP, then press the Fast Forward g button.
SELECT op CHOOSE B
→ AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
ON
2ND AUDIO
TO END PUSH EXIT
2-3
4
1
DV910(H9100).QX33 01.8.9 10:26 AM Page 19