B&B Electronics Network Device I-7011 - Manual (Page 49)

49
I-7011, I-7018 User Manual Rev:B1.0
2.27 @AACA
Description : Clear Latch Alarm
Syntax : @AACA[CHK](cr)
@ delimiter character
AA address of setting module (00 to FF)
CA command for clear latch alarm
Response : Valid Command : !AA[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example :
Command : @01DI Receive : !0120101
Read address 01 digital input, return latch alarm mode, low
alarm is set.
Command : @01CA Receive : !01
Clear address 01 latch alarm, return success.
Command : @01DI Receive : !0120001
Read address 01 digital input, return latch alarm mode, both
alarms are clear.
Related Command :
Sec.2.21 @AADI, Sec.2.23 @AAEAT, Sec.2.26 @AADA
Related Topic :
Sec.3.6 High/Low Alarm
Note : The command is for I-7011/11D/11P/11PD only