B&B Electronics Network Device I-7011 - Manual (Page 33)

33
I-7011, I-7018 User Manual Rev:B1.0
2.12 $AA8
Description : Read LED Configuration
Syntax : $AA8[CHK](cr)
$ delimiter character
AA address of reading module (00 to FF)
8 command for setting LED configuration
Response : Valid Command : !AAV[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
V LED configuration
1=module control, 2=host control
Example :
Command : $018 Receive : !011
Read address 01 LED configuration, return module control.
Command : $028 Receive : !012
Read address 02 LED configuration, return host control.
Related Command :
Sec2.13 $AA8V, Sec2.18 $AAZ(Data)
Note : The command is for I-7011D/11PD only