B&B Electronics Network Device I-7011 - Manual (Page 31)

31
I-7011, I-7018 User Manual Rev:B1.0
2.10 $AA5VV
Description : Set Channel Enable
Syntax : $AA5VV[CHK](cr)
$ delimiter character
AA address of setting module (00 to FF)
5 command for settting channel enable
VV channel enable/disable, 00 is all disabled, and FF is all
enabled.
Response : Valid Command : !AA[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example :
Command : $0155A Receive : !01
Set address 01 enable channel 1,3,4,6 and disable channel
0,2,5,7, return success.
Command : $016 Receive : !015A
Read address 01 channel status, return channel 1,3,4,6 enable
and channel 0,2,5,7 disable.
Related Command :
Sec.2.11 $AA6
Note : The command is for I-7018/18P only