Philips DVD-VCR Player DVP3355V - Manual (Page 8)

Español
Français
English
– 8 – –
EN
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
Symbols Used in This Manual
The following symbols appear in some headings in this manual.
: Description refers to video cassette tapes.
Description refers to DVD-VIDEO.
: Description refers to audio CD.
Note to CATV system installer:
• This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground should be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
DVD VCR DVD/VCR S-VIDEO OUT COMPONENT VIDEO OUT AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L Y
R
L
R
R
CB / PB
CR/ PR
DVD/VCR
AUDIO OUT
VIDEO OUT
L
R
VCR AUDIO IN
VIDEO IN
L
R
If your TV only has an Antenna input
(no A / V inputs), you will need an
RF modulator (NOT INCLUDED) to
connect this Unit
to your TV.
RF modulator
AUDIO IN
R L
VIDEO IN CHANNEL
4 3
TO TV
TV
ANT. IN
ANT. IN
No Antenna (RF) Output!
rear of TV
rear of your RF
modulator
AUDIO IN TO TV ANT. IN
L R
CHANNEL
4 3
VIDEO IN
ANT. IN
Set channel 3 or 4
rear of this Unit
RF coaxial cable
RF coaxial
cable
VHF / UHF
antenna
cable TV
company
or
RCA video cable
RCA audio cable
If your TV has antenna in jack only, it is still possible
to connect this Unit to your TV by using an RF modulator.
In this case, follow the instructions below.
1) Disconnect the power cords of the Unit from the AC
outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to
either 3 or 4, whichever the TV channel is least used in
your area. If your RF modulator has a modulator/antenna
switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the Unit to the AC outlet.
5) Turn on your TV and choose the same channel as
you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the RF
modulator.
Note(s):
• RF modulator is not supplied with this Unit. You need to
purchase this separately.
• The picture quality may suffer if this Unit is connected through
an RF modulator to an RF only TV. y
Connecting to RF Modulator (Not Supplied)