Philips DVD-VCR Player DVP3355V - Manual (Page 14)

Español
Français
English
– 14 – –
EN
Installing the Batteries for
the Remote Control
Install two AAA batteries (supplied)
matching the polarity indicated inside
the battery compartment of the Remote
Control.
Keep in mind the following when using the
Remote Control:
• Make sure that there are no obstacles
between the Remote Control and the
infrared sensor window on the Unit.
• The maximum operable infrared signal
ranges from the Remote Control are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
Remote Control
DVD mode VCR mode
• To select chapter or title
directly.
• To select track directly.
through a disc.
• To begin slow forward/reverse
playback in the pause mode.
• To search forward/backward
through a disc.
• To forward/backward a tape.
• To begin slow forward
playback in the pause mode.
• To repeat between your chosen
point A and B.
• To repeat between your
chosen point A and B.
• To select camera angles on a
disc.
• To select audio languages on a
disc.
• To select “STEREO”, “L-ch” or
“R-ch”.
• To select “HIFI” or “MONO”
mode during playback.
(Hi-Fi tapes only)
• To clear the markers.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To clear the markers.
• To remove status number in
program input.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To exit the VCR menu.
• To reset the tape counter.
• To call up the disc menu on a
disc.
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time, tape
counter and L1 or L2.
• To select DVD output mode.
• To activate DVD mode.
• To select the DVD output mode.
• To activate DVD mode.
• To select input “L1” or “L2”.
• To set black level on/off.
• To arrange the playing order or
play randomly.
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
• To select an item on
the VCR menu.
• To advance to the
next VCR menu.
• To go back one step
during clock and
timer programming.
• To open or close the disc tray. • To open or close the disc tray.
• To eject the cassette tape from
the cassette compartment.
• To pause disc playback.
• To advance playback one frame
at a time.
• To pause disc playback.
• To pause tape playback or
recording.
• To advance playback one frame
at a time.
• To begin disc playback. • To begin disc playback. • To begin tape playback.
• To skip chapters or titles. • To skip tracks.
• To start recording or one-touch
timer recording (OTR).
• To play back a chapter or title
repeatedly.
• To play back a track or disc
repeatedly.
• To select the repeat mode on/
off.
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
• To search chapter, title or time.
• To search track.
• To search time.
• To call up the index or time
search menu.
• To set or search the markers. • To set or search the markers.
• To call up the DVD setup menu. • To call up the DVD setup menu. • To call up the VCR menu.
• To select the recording speed.
• To turn the Unit on or to turn the
Unit into the standby mode. (To
completely turn off the Unit, you
must unplug the AC power cord.) p g p )
• To turn the Unit on or to turn the
Unit into the standby mode. (To
completely turn off the Unit, you
must unplug the AC power cord.) p g p )
• To turn the Unit on or to turn the
Unit into the standby mode. (To
completely turn off the Unit, you
must unplug the AC power cord.) p g p )
• To stop playback. • To stop playback. • To stop playback or recording.
• To select subtitles on a disc.
• To call up the top menu on a
disc.
• To adjust the tracking manually
during playback.
• To put the VCR into standby
mode for a timer recording.
• To select the VCR output mode.
• To activate VCR mode.
• To magnify part of a picture.
(2x/4x)
Button
(Alphabetical order))
Media
2 3
1
Note(s):
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
• Always remove batteries from Remote
Control if they are dead or if the Remote
Control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
• If you turn off this Unit, [OPEN/CLOSE A] on
the Unit or Remote Control is not available.