Philips DVD-VCR Player DVP3355V - Manual (Page 25)

English
Français
Español
EN
– 25 – –
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 24.
B
AUDIO Setting
Choose the appropriate audio setting for your device. It is only affected during the playback of DVD discs. Follow steps 1 to 3 in the
“CUSTOM Menu” section on page 24.
C
4
Select the desired item.
SETUP AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
ON
BITSTREAM
5
Note(s):
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear on
the top and bottom of the TV
screen.
• Select “4:3 PAN & SCAN”
for a full height picture with
both sides adjusted.
• Select “16:9 WIDE” if a
wide-screen TV is connected
to this Unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, it
automatically selects the best
resolution setting (“FRAME”
or “FIELD”) based on the
data characteristics of the
pictures. (default)
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on the
TV screen is called a “frame”,
which consists of two
separate images called “field”.
• Some pictures may be blurred
if you select “AUTO” in the
still mode due to their data
characteristics.
4
Select the desired item.
DISPLAY menu
AUDIO menu
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROG. SCAN
OFF
STILL MODE:
(Default: AUTO)
See note on the right.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROG. SCAN
OFF
STILL MODE
AUTO
FIELD
FRAME
5
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the Unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
OFF
ON
BITSTREAM
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
ON
PCM
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
OFF
BITSTREAM
Note(s):
DRC:
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
DOWN SAMPLING:
• When playing back a 96kHz
disc with the copyright
protection, the sound will be
down sampled at 48kHz even
if the “DOWN SAMPLING” is
set to “OFF”.
• This function is only
available when the disc
digital output was recorded
at 96kHz.
SETUP DISPLAY
TV ASPECT
STILL MODE
PROG. SCAN 4:3 LETTER BOX
AUTO
OFF
or
or
6
To exit the menu
Select the
desired
setting.
or
Select the
desired
setting.
or
Note(s):
PROGRESSIVE SCAN:
• You can set “PROG. SCAN” to
“OFF” in “DISPLAY” menu or
press and hold [B (PLAY)]
on this Unit on the DVD side
for more than 5 seconds during
playback until the P-SCAN
indicator on this Unit turns off.
• When “PROG. SCAN” is “ON”,
video signals from the Unit’s
VIDEO OUT and S-VIDEO OUT
jacks will be distorted or not be
output at all.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROG. SCAN OFF 4:3 LETTER BOX
AUTO
ON
Select “Yes”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
A c t i v a t e P ro g re s s i ve ?
SELECT: K / L SET:OK
NO
YES
NO
YES NO
YES
Confirm again to use progressive scan.
If Picture is good, Select ‘YES’.
SELECT: K / L SET:OK
Select “Yes”.
If there is no picture
or you do not press
any buttons for 15
seconds, “PROG.
SCAN” will switch to
“OFF” and it will exit
“SETUP” menu.
or
or
PROGRESSIVE SCAN: QUICK
(Default: OFF)
See note on the left.
6
To exit “TV ASPECT” or
“STILL MODE” menu
To complete
“PROG. SCAN” setting
Note(s):
• In “QUICK” menu, “OSD
LANGUAGE”, “TV ASPECT”,
“PROG. SCAN” or “DOLBY
DIGITAL” are available. “QUICK”
menu consists of the setting
menu frequently used and they
are accompanied with QUICK .
You can make all settings in
“CUSTOM” menu.
Note(s):
• In “QUICK” menu, “OSD
LANGUAGE”, “TV ASPECT”,
“PROG. SCAN” or “DOLBY
DIGITAL” are available. “QUICK”
menu consists of the setting
menu frequently used and they
are accompanied with QUICK .
You can make all settings in
“CUSTOM” menu.
Continued on next page.