Philips DVD-VCR Player DVP3355V - Manual (Page 21)

English
Français
Español
EN
– 21 – –
1 Press [S (Previous)] or [ r T (Next)] during playback.
1 Press [BACK U].
1 Press [MARKER].
2 Select the marker.
3 Press [OK] at the desired marker.
1 Press [MARKER].
2 Select a marker.
3 Press [OK].
1 Press [SEARCH] repeatedly until the time search display appears.
2 Select a desired disc time by using [the Number buttons] within 30
seconds.
1 Press [S (Previous)] or [ r T (Next)] during playback.
1 Press [SEARCH] once for the chapter search.
Press [SEARCH] twice for the title search.
2 Select title/chapter number by using [the Number buttons]
within 30 seconds.
1 Press [SEARCH].
2 Select track number by using [the Number buttons] within 30 seconds.
Search Functions
1:29:00
To return to the marker later
To exit the marker screen
_ _/29
_ _/29
_ _/12
_ _/12
TR 1 TR 2 TR 3 TR 4
Current Track
(TR)
(Next) (Previous)
Using [ S (Previous)] or [ T (Next)]
CH 1 CH 2 CH 3 CH 4
Current Chapter
(CH)
or
TT 1 TT2 TT3 TT4
Current Title
(TT)
(Next)
(Next) (Previous)
(Previous)
Using [ S (Previous)] or [ T (Next)]
1:29:00
Note(s):
• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the time search display if the total
time of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
• For audio CD, time search is not available for programmed and random
playback.
Note(s):
• The marker display will disappear in about 30 seconds when there is no
output.
• To clear a marker, select the marker to be cleared at step 2 in the
section “To set a marker” or “To return to the marker later” and then
press [CLEAR].
• Opening the disc tray or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To return
to the marker later” will also erase all markers.
or
or
• For the disc with less than 10 tracks, press the track number directly.
• For discs with more than 10 but less than 99 tracks, to play back single-
digit track, press [0] first, then the track number (e.g., for track 3, press
[0], [3]). To play back a double-digit track, press the track number.
(If the disc has no chapters)
Note(s):
• [+10] can also bring the track search display, except for the disc with
less than 10 tracks. For such a disc, track search can be performed by
just pressing the track number.
• For audio CD, track search is not available for programmed and random
playback.
Search function does not work during programmed or random playback.
Using Track Search Using Time Search
Marker Setting
This function allows you to assign a specific point on a disc to be
called back later.
To set a marker
Note(s):
• Depending on the disc being played back, this function can also be
performed by directly entering the desired chapter number with
[the Number buttons]. Refer to the manual accompanying the disc.
Using Title / Chapter Search
or
or