Philips CDR700BK - Manual (Page 27)

27
English
Search
1
Hold down
5 or 6 (in Play mode).
➜ The player first searches backwards or forwards at
10 times normal speed with sound at low volume, then
goes to 50 times normal speed with sound muted.
2
Release the button at the desired passage.
➜ Play will start at the desired passage.
Note: During Shuffle, Repeat Track or Programmed play, search
is restricted to within the track being played at the time.
Shuffle (random order) play
Only in Changer mode.
1
Press SHUFFLE before or during CD play to start shuffle
play.
➜ The tracks on the CD (or program if set) will play in
random order.
2
Press SHUFFLE again to return to normal CD play.
➜ CD recorder goes to Stop mode.
Note: Shuffle is also cleared when you open the disc tray.
Repeat CD, track or program
1
Press repeat one or more times during CD play.
➜ When
REPEAT TRACK lights up, the current track will
play repeatedly. When REPEAT ALL lights up, the entire
disc or program plays repeatedly.
2
To return to normal play, press REPEAT one or more times
until:
➜ The
REPEAT text disappears from the display.
Note:
You can use shuffle in combination with REPEAT ALL or
programmed play.
REPEAT is also cleared when you open the disc tray.
Programming tracks
0
You can program up to 99 tracks to play in any desired
sequence.
0
Tracks can be programmed more than once, but each time
counts as a track (
STEP ).
0
A program for playback can be made from both the disc in
the recorder deck and the disc in the player deck. A
program for recording can only be made from the disc in
the player deck.
Programming
1
Select Changer mode or DJ mode using the DJ MODE
button.
➜
CHANGER or DJ MODE appears on the display.
2
Press CDR or CD to select the required deck.
➜ Selected button lights up.
3
In Stop mode press PROG to enter Program mode.
➜
PROG flashes and PROGRAM followed by track
information appears on the display.
4
Select the desired track numbers by turning the
EASY JOG/ENTER button left or right and store by
pressing ENTER.
or:
Key in a track number with the number buttons and press
ENTER to confirm. For 2-digit numbers, press the buttons
in rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number
of programmed tracks ( STEPS ) are displayed.
5
Repeat step
4
for all tracks to be programmed.
6
Press STOP
9 or PROG to end programming.
➜
PROG lights continuously.
7
Press PLAY/PAUSE
2; to start programmed play.
Notes:
To review the program, press PROGRAM, followed
by
5 or 6 with the CD recorder in Stop mode.
To add more tracks to the program, repeat steps 3 to 7.
If you try to store more than 99 tracks,
PROG FULL will
appear on the display.
Clearing a program
1
Press STOP
9 if necessary to stop programmed play.
2
Press STOP
9 again to clear the program.
➜
PROG will disappear from the display.
0
The program is also cleared when you open the disc tray.
Erasing a track from a program
1
In Stop mode press PROG to enter Program mode.
2
Use
5 or 6 to select the track from to be deleted.
➜ The track number and program step will be shown on
the display.
3
Press CANCEL/DELETE to erase the track from the
program.
➜ The remaining program steps and the remaining playing
time on the program will be displayed.
4
Repeat steps 2 and 3 for all tracks to be erased.
5
Press STOP
9 or PROG to end erasing.
➜
PROG will light up continuously.
EASY JOG
CD
AUDIO CD PLAYBACK
ENTER
STORE/MENU CANCEL/DELETE PLAY/PAUSE STOP OPEN/CLOSE
Playing