How to record from the internal deck, Recording an entire cd – Philips CDR700BK User Manual
Page 19
19
English
Recording an entire CD
The
M A K E C D
recording mode is a fast and easy way to
copy an entire CD.
During high speed recording the sound is not audible.
Important: After this recording the disc is finalized
and cannot be recorded on anymore.
Preparing
1
Place an unfinalized CDR(W), absolutely free of scratches
and dust particles in the CDR tray.
Place the disc from which you want to record in the right
CD tray.
2
With the CD recorder stopped, press TYPE three times to
select MAKE CD for recording of an entire CD or a
program of tracks and to automatically finalize the
recording.
➜ The display first shows
MAKE CD
.
The
RECORD
label starts blinking. After 3 seconds
the display shows the remaining CDR(W) recording
time on the left and total time of source on the right.
(every 2 seconds
PRESS RECORD
is displayed.)
0
If
DOES NOT FIT
appears on the display, there is not
enough recording space on the CDR(W) disc.
You can press RECORD: only complete tracks that still fit
on the CDR(W) will be recorded.
Recording
3
Press RECORD to start recording.
➜
WAIT
lights up.The display shows the total remaining
time for the selected recording. High speed recording
starts.
RECORD
lights continuously.
0
To check the track number and track time, press DISPLAY.
This can be done during recording.
0
Recording will stop automatically.
Note: Copy prohibited tracks will be copied analog.
ANALOG REC
is displayed.
4
To stop recording manually, press STOP
9.
➜
UPDATE
lights up,
RECORD
goes out and
recording stops. (Minimal track length must be
4 seconds otherwise silence will be added to the track.)
0
If STOP
9 was pressed within 3 seconds after RECORD, no
recording will take place.
After recording, the display shows
UPDATE
for several
seconds.The Total time indications can differ slightly.
However, no music information is lost.
Notes:
In this Recording mode, the Pause function is not operative.
We advise you to leave the recording level at its factory
setting (0 dB). If the recording level is to low, check if the setting
is 0 dB with the EASY JOG.
Finalizing
In ‘
MAKE CD
’ recording mode your disc will be
automatically finalized, so it can be played on any CD player.
➜ After recording, the display shows
UPDATE
for several
seconds. Finalizing starts and the display shows
FINAL
and the remaining finalization time.The Total time
indications can differ slightly. However, no music
information is lost.
CDR
AUDIO CD PLAYBACK
ERASE
EXT SOURCE
TYPE
RECORDING
RECORD
OPEN/CLOSE
PLAY/PAUSE
STOP
FINALIZE
DJ MODE
REPEAT
SCROLL
DISPLAY
SHUFFLE
PROG
EASY JOG
CD
AUDIO CD PLAYBACK
ENTER
STORE/MENU CANCEL/DELETE
PLAY/PAUSE
STOP
OPEN/CLOSE
How to record from the internal deck