Finalizing, Finalizing cdr & cdrw discs, Unfinalizing cdrw discs – Philips CDR700BK User Manual
Page 24
24
English
Finalizing CDR & CDRW discs
During finalizing, an index is written to the disc.
Finalizing is a simple procedure that is necessary in order
to:
- be able to play recordings on a CD PLAYER
- avoid further unwanted recordings on a disc,
- avoid erasure of tracks on a CDRW,
- write CD text on a CDR(W).
Note: When a CDR has been finalized, no more recordings can
be added.
Auto finalizing
The CDR(W) is automatically finalized when using the MAKE
CD recording function.
Manual finalizing
1
Make sure the disc (in the CD recorder) is absolutely free
of scratches and dust particles.
2
With the recorder stopped, press FINALIZE.
➜ The display will show
FINALIZE CD
and
PRESS
RECORD
.
3
Press RECORD.
➜
XX XX FINAL
and the approximate finalization time is
shown on the display.
The display counts down through the finalization.
Upon completion, the total number of tracks and the
total time recorded will appear on the display.
For CDR(W),
changes to
on display.
Finalizing will take at least 2- 4 minutes.
Note: During finalization, the CD recorder will not accept
operating commands.
Unfinalizing CDRW discs
For CDRW discs only
If you want to make more recordings (or erase tracks) on a
finalized disc, you must unfinalize it first.The index of the
disc content will be removed.
To unfinalize
1
With the CD recorder stopped, press TYPE or ERASE.
➜
UNFINALIZE
and
PRESS ENTER
will appear on the
display.
2
Press the EASY JOG/ENTER button.
➜ The disc will now be unfinalized and can be used again
to record.
Note: After unfinalizing the recorder enters:
-
RECORD FAST
mode if the TYPE button was pressed
before unfinalizing
-
ERASE TRACK
mode if the ERASE button was pressed
before unfinalizing
0
If no further recording or erasure is required,
press STOP
9.
Notes:
Unfinalizing will take approximately 1.5 minutes.
When unfinalizing a CDRW disc with text available, this text
will be transferred to the CD recorder memory. However,
if the text memory is full, the message
MEMORY FULL/FINALIZE CD
will be displayed.Text
must be erased, stored for other discs, or another disc must be
finalized in order to create space in the memory.
RW
Finalizing