Philips CDR700BK - Manual (Page 14)

14
English
Tip:
If the integrated CD player deck will be the only
source from which you are going to record, just
connect the analog output for playback of the CD
recorder to your amplifier/receiver (cord 1).
Analog connections
These connections are required for playback on the CD
recorder deck as well as the CD player deck (cord 1). Cord 2 is
required for making recordings from an external analogue
source (e.g. via amplifier: cassettedeck or turntable).
1
Connect supplied audio cord between the ANALOG
OUT-jacks on the CD recorder and the ANALOG input
jacks of the amplifier/receiver (TAPE, CD-R, AUX or
PLAY IN, LINE IN).
Insert the red plugs into the R jacks, and the white plugs
into the L jacks.
2
Connect supplied audio cord between the ANALOG IN-
jacks on the CD recorder and the analog outputs of the
amplifier/receiver (CDR OUT,TAPE OUT, AUX OUT,
REC OUT, LINE OUT etc.).
Insert the red plugs into the R jacks, and the white plugs
into the L jacks.
3
Connect all other components of your system (tape deck,
CD player, tuner, record player etc.) via their ANALOG
OUT-jacks to the appropriate analog input jacks of the
amplifier/receiver (CD IN,TUNER IN, AUX IN,
PHONO IN etc.).
➜ Any analog device, connected to the amplifier/receiver
can now be used as recording source (
ANALOG ).
Analog connection CD player deck (DJ-mode)
This connection is only required if you want to playback on the
CD player deck seperately from the CD recorder deck..
This will be the case in DJ-mode.
1
For separate playback on the CD player deck, connect a
third cord 3 (not supplied) between the ANALOG OUT
jacks of the CD recorder and the input jacks of an amplifier
e.g. CD, or AUX.
Insert the red plugs into the R jacks, and the white plugs
into the L jacks.
Notes:
Never use the PHONO input.
Your CD recorder/player is equipped with a digital coaxial
output for the CD player deck.This output can be used for
digital playback.
Digital connections
Digital coaxial connection
This connection is only required for direct recording from an
external digital coaxial source (e.g a CD player, DVD, DAT).
1
Connect a digital coaxial cord between the DIGITAL IN-
jack on the CD recorder and the DIGITAL OUT jack of the
digital source.
➜ Recording can now be done via the digital coaxial input
(
DIGITAL1 ).
CD RECORDER 1
CD PLAYER
DIGITAL
IN OUT
OPTICAL
IN ANALOG
IN
L
R
L
R
OUT ANALOG DIGITAL
OUT
L
R
OUT
CDR CD
CD CDR CDR CDR CDR CD
CD RECORDER
DIGITAL
RECEIVER
1
DIGITAL
IN OUT
OPTICAL
IN ANALOG
IN
L
R
L
R
OUT ANALOG DIGITAL
OUT
L
R
OUT
CD RECORDER
CDR CD
CD CDR CDR CDR CDR CD
1
CD RECORDER
AMPLIFIER/
RECEIVER
CD PLAYER
2
RECORD PLAYER
3
3
DIGITAL
IN OUT
OPTICAL
IN ANALOG
IN
L
R
L
R
OUT ANALOG DIGITAL
OUT
L
R
OUT
CDR CD
CD CDR CDR CDR CDR CD
How to connect your recorder