Philips CDR700BK - Manual (Page 22)

22
English
Recording from LP’s or cassettes
Make sure that the turntable or cassette deck is connected
with its analog out connectors to the amplifier/receiver
which is connected to the analog in connectors of your
CD-recorder: connection is ANALOG.
Note: It is not possible to connect a turntable directly to the CD
recorder.
Track increments
0 For recordings from ‘noisy’ external analog sources like LP
or cassette tapes we strongly recommend to switch Auto
Track to OFF and insert track numbers manually.
0
Auto Track is default switched on. If you wish to switch
Auto Track off or on:
1
Press STORE/MENU.
➜
TEXT EDIT will appear on the display.
2
Rotate the EASY JOG/ENTER button to select the AUTO
TRACK submenu.
➜
AUTO TRACK will appear on the display.
3
Press EASY JOG/ENTER to confirm.
➜
ON or OFF will appear on the display.
4
Turn the EASY JOG/ENTER button to select Auto track
O N or OFF .
5
Press EASY JOG/ENTER to confirm.
➜
AUTO TRACK will appear on the display.
6
Press STOP
9 to exit.
During analog and digital recording, you can always insert
track numbers manually by pressing TRACK INCR. on the
remote control.The minimum track length is 4 sec.Track
numbers cannot be changed after recording.
Tip:
For the best recording results we advise you to first
make a recording onto a CDRW (rewritable) disc.
If for instance you forgot to add track increments or
made another mistake during recording this can
always be corrected.When your recording is complete
and correctly recorded:
- finalize the CDRW disc
- record this disc onto a CDR (recordable) disc, using
the ‘Make CD’ function. (See paragraph ‘Recording
an entire CD’)
Preparing
1
Place an unfinalized CDR(W), absolutely free of scratches
and dust particles in the left CDR tray.
2
Press EXT SOURCE repeatedly until ANALOG lights up and
ANALOG appears on the display.
3
With the CD recorder stopped press TYPE five times to
select
REC EXT MAN .
➜ The display shows REC EXT MAN followed by WAIT .
If MANUAL starts to flash you can insert track
increments manually (AUTO TRACK is set to OFF).
After a few seconds
PRESS RECORD followed by the
remaining time and track number appear on the display.
0
You can record a 3-second silence at the start of a track by
pressing PLAY/PAUSE
2; on the CD recorder before
starting the recording.
Recording
4
To start recording, press RECORD on the CD recorder
and immediately start the turntable.
➜
lights continuously.The track number and recording
time will appear on the display.
0
To interrupt recording, press PLAY/PAUSE
2; on the
CD recorder.
➜ starts to flash. Resume at step
4
.
5
To stop recording, press STOP
9 on the CD recorder.
➜ UPDATE lights up and goes out.
After recording the display will show UPDATE for several
seconds.
Note: With AUTO TRACK OFF, the recording will not stop
automatically.
Finalizing
If you want to play the recorded CD(RW) on a normal
CD player, you must first finalize the disc. Please note that
you cannot add anymore tracks on a finalized CDR.
See Finalizing CDR and CDRW discs.
CDR
AUDIO CD PLAYBACK
ERASE EXT SOURCE TYPE
RECORDING
RECORD
OPEN/CLOSE PLAY/PAUSE STOP FINALIZE
DJ MODE REPEAT SCROLL DISPLAY SHUFFLE PROG
EASY JOG
CD
AUDIO CD PLAYBACK
ENTER
STORE/MENU CANCEL/DELETE PLAY/PAUSE STOP OPEN/CLOSE
How to record from an external source