Philips TSU600099 - Manual (Page 36)

ProntoProEdit 3.0 - User Manual Basic CCF Actions
Philips Page 36 of 76
Viewing and Testing a CCF
Previewing with ProntoProEmulator
Though part of the ProntoProEdit package, ProntoProEmulator is a separate
application that emulates every aspect of your ProntoPro.
You can use ProntoProEmulator to testdrive your CCF without the need to
download it to your ProntoPro. At any time you can launch ProntoProEmulator
to preview the CCF you created in ProntoProEdit.
If you connect the ProntoPro to your computer using the ProntoPro serial
cable:
You can learn the ProntoProEmulator.
You have to switch the ProntoProEmulator to LEARN Mode and the
ProntoPro to USE Mode. The ProntoProEmulator can now learn commands
without uploading the entire CCF from your ProntoPro. Please refer to the
ProntoPro Owner’s Manual for more information on learning commands.
You can learn the ProntoPro.
You have to switch the ProntoPro to LEARN Mode and the
ProntoProEmulator to USE Mode. The ProntoPro can now learn commands
without downloading the entire CCF into your ProntoPro. Please refer to
the ProntoPro Owner’s Manual for more information on learning
commands.
You can send IR commands from the ProntoProEmulator.
If both ProntoProEmulator and the ProntoPro are in USE Mode, you can
use ProntoProEmulator to test commands directly on your devices.
Launching ProntoProEmulator
Select Emulate from the Tools menu.
-or-
Click in the toolbar.
ProntoProEdit saves the current configuration. The ProntoProEmulator is
launched and the CCF is displayed.
The speed of the ProntoProEmulator depends on your PC and the CCF. It may
differ from the speed on your ProntoPro.