BenQ PB6200 - Manual (Page 83)

83
PART INSPECTION CRITERIA
Packing, marking and accessory
Inner packing material broken. minor
Carton damaged with hole over 1.5 cm in diameter. minor
Carton crashed with dent over 5 cm in diameter. minor
Printing of carton is illegible. minor
Broken packing bag minor
Spec. label's serial number not the same as carton label's. Major
Packing model not the same as carton. Major
Marking missing/wrong. Major
Accessory shortage/wrong. Major
Projector missing(found none in carton). Major
Label on box missing or damaged Major
Strange objects in the box Major
Appearance on visible parts
Poor printing on panel sticker(segment broken, illegible). minor
Damage or deviation when viewed at a distance of 50 cm. minor
Cover/case is dirty(removable). minor
Cover/case exists black spot(irremovable). minor
Cover/case is scratched. (Note 1) minor
Spec Label reverse, rugged, illegible printing. minor
LED sink over 1 mm. minor
Label/screws shortage or missing. Major
Wrong logo of panel sticker. Major
Wrong spec. label printing. Major
Label on product wrong or missing Major
Installation
Any accessory which are failed Major
to meet the installation purpose