BenQ PB6200 - Manual (Page 52)

52
II. ADC layer (Fig-4): (only available when input source is analog RGB)
(Fig-4) ADC layer
1. ADC Brightness: ADC brightness auto calibration black.
2. ADC Contrast: ADC contrast auto calibration white.
3. ADC Offset RGB: value to tell you calibrate result.
4. ADC Gain RGB: value to tell you calibrate result.
5. Fac Brightness: adjust default brightness value in source PC.
6. Fac Contrast: adjust default contrast value in source PC.
III. Color layer (Fig-5):
(Fig-5) Color layer