Philips 37PF9631D-37B - Manual (Page 47)

English
User Man
ual
45
Connect a Digital Surround receiver
< Connect a Digital Multichannel Surround
receiver to the
DIGITAL AUDIO OUT
connector at the bottom of the TV.
L
R
VIDEO
DIGITAL
AUDIO OUT
AV3
S-VIDEO
Record a TV program
You can record a TV program using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
See the handbook for your recorder.
Note: when recording analog programs, switching channel
numbers on your TV does not disturb recording !
Record with your recorder
DIGITAL
AUDIO
OUT
Before operating your connected equipment you have to make
a selection in the Setup menu, Select your source, p. 20.
1. Press the AV+ button repeatedly or select Source in the
Setup menu (see p. 20) to select AV1 , AV2 , AV3 , HDMI ,
Side or TV , according to where you connected your
devices.
2. Press the cursor up/down.
3. Press
OK .
7 8 9
0 AV+ -
INFO REC
ON/OFF MODE
VIEW
- FAVORITES -
✓
Ambilight
AV+
Select connected equipment
Note: Due to legal requirements, it is possible
that with certain copy protected PCM audio
qualities from a peripheral device connected to
the
HDMI input, the Digital audio output signal is
muted