Philips 37PF9631D-37B - Manual (Page 42)

40
Connect a recorder and Cable box with RF output
1. Use an optional signal splitter.
2. Connect one of the cable TV signal splitter outputs 1 to the cable box’s
IN jack.
3. Connect the other cable TV signal splitter output 2 to the CABLE/ANTENNA 75 Ω
x plug on
the bottom of the TV.
4. Connect the cable box’s OUT jack 3 to the recorders RF IN socket.
5. Connect the Video, Audio Left and Right (only for stereo sound) recorder AV cables 4 to the
VIDEO , AUDIO L and R input AV1, AV2 or AV3 jacks on the TV.
6. Select the equipment you have connected in the Setup menu, Select your source, p. 20 and link
it to the AV connector you have connected your equipment to.
ANTENNA
75
Pb Y Pr
AUDIO
R L
VIDEO
AV2
L
R
VIDEO
DIGITAL
AUDIO OUT
AV3
Pb Y Pr
AUDIO
R L
VIDEO
AV1
S-VIDEO
CABLE
RECORDER Cable Box
3
OUT IN OUT IN
SIGNAL
SPLITTER
4
2
1
AV1 / AV2 / AV3 :
L + R + VIDEO
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the S-VIDEO input of AV3 and connect
the audio cables to the AUDIO L and R input jacks of AV3.
When using the S-VIDEO connector do not connect any device to the AV3 VIDEO jack;
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.