Philips DVP3345V-17 - Manual (Page 31)

English
Special Effects Playback 31
● Before you begin, press VCR so VCR light appears on the front of the
DVD/VCR.
Forward and Reverse Searching (SP/LP/SLP) /
Super High Speed Searching (LP/SLP)
1 During tape playback, press and release FFW g
or REW h. A fast forward or reverse picture search
will begin.
Press FFW g or REW h, then press again. The
search speed will increase. Repeatedly pressing FFW g
or REW h will switch between Regular and High Speed
Searching.
2 To return to normal playback, press PLAY B.
Viewing a Still Picture
1 During tape playback, press PAUSE k. A still picture
will appear on the screen.
● To advance the still picture one frame at a time, press
PAUSE k repeatedly.
● To release the still picture and return to playback, press
PLAY B.
Viewing a Slow Motion Picture
1 During tape playback, press PAUSE k, then press
FFW g. The tape will play in slow motion.
● To change the playback speed, press FFW g or
REW h.
● To return to normal playback, press PLAY B.
• Slow and still modes will switch
to stop mode after 5 minutes
to protect the DVD/VCR and
the tape from damage.
• SP/LP/SLP means this feature will
work with tapes recorded in
Standard Playback, Long Playback or
Super Long Playback. LP/SLP means
this feature will work with tapes
recorded in Long Playback or Super
Long Playback. Tape speed details
are on page 57.
Helpful Hints
DVD VCR SETUP
INPUT MENU
BACK PAUSE STOP
PLAY
OK
FFW REW
CLEAR TITLE
DISC
TRACKING
1 2
6 5 4
7 8 9
0 +10
3
The following tape features are available in VCR mode. Press VCR so VCR light appears on the front of the DVD/VCR, if
necessary.
Automatic Playback
When you put a tape in the DVD/VCR, the power will come on. If the tape’s record tab is missing, playback will begin.
If a Timer Recording is set and “
” is flashing in the display panel, the power will not come on automatically
when you insert a tape with the record tab intact.
If a Timer Recording is set and “
” is flashing in the display panel, the DVD/VCR will eject the tape if the record
tab is missing.
Automatic Rewind, Eject
When a tape is played, fast forwarded or recorded to its end, the tape will rewind to the beginning, stop and eject
itself. This feature does not operate if AUTO REPEAT is ON. Details are on page 29.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in).
If a Timer Recording is set and “
” is shown on the display panel, press TIMER SET on the remote control or
STOP/EJECT C A on the front panel to cancel the timer standby mode, and then press STOP/EJECT C A to
remove the tape. Remember to insert a tape and press TIMER SET to reset the Timer Recording.
Automatic Tracking Adjustment
The VCR adjusts tracking automatically to give you the best possible picture quality. With some recordings, however,
you may get a better picture using manual tracking.
Manual Tracking
To manually adjust the tracking during normal playback and Slow Motion Playback of a videotape, press
TRACKING K/L. Tracking will return to Automatic Tracking when you press STOP C or insert a tape. You
can also press TRACKING K/L to remove vertical jitter in a Still picture.
Automatic Operation Features
E8E20UD_EN1 8/23/07 1:25 PM Page 31