Philips DVP3345V-17 - Manual (Page 26)

DVD VCR SETUP
INPUT MENU
REC SPEED MODE
ANGLE SEARCH REPEAT
DISPLAY SUBTITLE ZOOM
TIMER SET
REPEAT
A-B
AUDIO
BACK PAUSE STOP
PLAY
OK
FFW REW
CLEAR TITLE
DISC
TRACKING
OPEN/CLOSE
1 2
6 5 4
7 8 9
0 +10
3
English
26 Satellite Link
You can set the DVD/VCR to start recording whenever it detects
a video signal from the external tuner.
Before you begin:
● Set the clock. Details are on page 19.
● Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).
● Press VCR so VCR light appears on the front of the DVD/VCR.
● Turn on the external tuner.
● Use the VCR AUDIO and VIDEO IN jacks on the rear (L1) to
connect the DVD/VCR to the external tuner. VCR AUDIO and
VIDEO jacks on the front (L2) cannot read any signal from the
external tuner.
● If the external tuner is equipped with some kind of timer
function, set it to output audio/video signals when it comes to
the time you want to start recording and stop when it comes to
the time you want to stop recording. Refer to the tuner’s
manual on how to set the timer.
● If the external tuner is not equipped with timer function, leave it
on for Satellite Link Recording.
1 Press SPEED repeatedly until the desired tape
speed (SP or SLP) appears briefly on the screen.
Details about tape speed are on page 57.
2 In stop mode, press SETUP.
3 Press K or L to select SATELLITE LINK,
then press B.
TIMER PROGRAMMING
B SATELLITE LINK
AUTO REPEAT
[OFF]
CLOCK SET
LANGUAGE SELECT
- M E N U -
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
DVD
L
R
S-VIDEO OUT DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
DVD
L
R
S-VIDEO OUT L
R
L
R
Y
C B / P B
AUDIO OUT
DVD/VCR VCR
VIDEO OUT
AUDIO IN
VIDEO IN C R / P R
COMPONENT VIDEO OUT DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
DVD
L
R
S-VIDEO OUT
L1
External tuner
To audio/video
input jacks
DVD/VCR
Audio/Video Cables
(supplied)
2
4-6
1
E8E20UD_EN1 8/23/07 1:25 PM Page 26