Philips DVP3345V-17 - Manual (Page 27)

English
• If you have not set the clock,
CLOCK SET menu will appear at
step 3. Refer to “Clock (VCR)”
on page 19.
• You cannot set the ending time
for the Satellite Link Timer
Recording on this DVD/VCR.
• Recording picture will be
distorted if the copy protection
signal is being detected during
Satellite Link Timer Recording.
• When a regular Timer Recording
and the Satellite Link Timer
Recording are overlapped, those
recordings are recorded as
illustrated below.
e.g.) In case of the Timer Recording is overlapped on the
existing Satellite Link Timer Recording.
Timer Recording
recording result
Satellite Link
e.g.) In case of the Timer Recording is programmed in the
middle of the Satellite Link Timer Recording.
Timer Recording
recording result
Satellite Link
e.g.) In case of the Satellite Link Timer Recording is
overlapped on the existing Timer Recording.
Timer Recording
recording result
Satellite Link
Helpful Hints
Satellite Link (cont’d) 27
4 Press K or L to set the desired start hour,
then press B.
● The hour can be selected from 1-12 with AM or PM.
● When the external tuner signal is stopped, recording will
be stopped also.
5 Press K or L to set the desired start minutes.
If you wish to go back to the left, press s.
6 Press B to set Satellite Link standby mode.
● “ ” on the DVD/VCR’s display panel lights up and the
DVD/VCR goes to the DVD mode. If you do not use
DVD function, turn off the DVD/VCR.
● If the external tuner is not equipped with timer function,
leave it on for Satellite Link Recording.
● To cancel the Satellite Link function in standby mode:
Press TIMER SET on the remote control or
STOP/EJECT
C A on this DVD/VCR.
● To cancel the Satellite Link function while the Satellite
Link Recording is in progress:
Press STOP/EJECT
C A on the DVD/VCR.
SATELLITE LINK
0 1 : 3 0 PM
[ON]
SATELLITE LINK
0 1 : 0 0 PM
SATELLITE LINK
1 2 : 0 0 AM
E8E20UD_EN1 8/23/07 1:25 PM Page 27