Programming, English, Remarks about programming – Philips CDR770BK User Manual
Page 18
English
24
• You can program up to 99 tracks to play in any desired
sequence.
• Tracks can be programmed more than once, but each time
counts as a track (
STEP
).
Programming
1 In Stop mode press PROGRAM to enter Program mode.
➜
PROG
flashes and
PROGRAM followed by track
information appears on the display.
2 Select the desired track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys and press
ENTER to confirm. For 2-digit numbers, press the keys in
rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks (
STEPS
) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROGRAM to end programming.
➜
PROG
lights continuously.
5 Press PLAY/PAUSE 2 ; to start programmed play.
Note:
- To review the program, press PROGRAM, followed by 5 or
6 with the CD recorder in Stop mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks,
PROG FULL will
appear on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
➜
PROG
will disappear from the display.
• The program is also cleared when you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROGRAM to enter Program mode.
2 Use 5 or 6 to select the track from to be deleted.
➜ The track number and program step will be shown on
the display.
3 Press CANCEL/DELETE to erase the track from the program.
➜ The remaining program steps and the remaining playing
time on the program will be displayed.
REM
TRACK
TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
SYNC MANUAL
RECORD
REM
TOTAL
ALL
TRACK
TIME
STEP
TRACK
2
7
8
11
REM
TRACK
REC
TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
SYNC MANUAL
RECORD
REM
TOTAL
ALL
TRACK
TIME
STEP
TRACK
1
REM
TRACK
REC
TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
SYNC MANUAL
RECORD
REM
TOTAL
ALL
TRACK
TIME
STEP
TRACK
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
Remarks about programming
PROGRAMMING