Philips CDR770BK - Manual (Page 11)

English
17
You will soon discover how easy it is to make your own CDs.
Nevertheless, it is advisable to use a CDRW disc for your first
try.
• If the disc is a CDRW and is already finalized, you must
unfinalize it first.
• The recording procedure is the same for CDRs and CDRWs.
• If the disc already contains recordings, the CD recorder will
automatically search for the end of the last track, so that
recording can start from there.
• CD text can be added to a recording in Stop mode and
during recording.
• CD text cannot be recorded from an external CD player.
(Text information is not available on the output of the CD
player.)
• There must be at least 7 seconds of recording time left on
the disc, otherwise you will not be able to enter record
standby mode.
DISC FULL will then show on the display.
• If the display indicates
COPY PROTECT no digital
recording can be made of the source material. Recording
will not start.
• The Serial Copy Management System (SCMS) only
allows digital recording under specific conditions:
- This means that it is not possible to make a digital copy
from a digital copy.
- Analog recording is always possible !
- The number of recordings to be made from the original is
unlimited.
• A maximum of 99 tracks can be recorded on a disc.
Minimum allowable track length is 4 seconds.
• Recordings from DAT or DCC players will not always stop
automatically.
Important:
If you want to play the recorded CDR disc on a regular
CD player, it must be finalized. See finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers do not use REC
MANUAL.
Your recorder offers several recording modes.
- RECORD DISC - to make a synchronized recording of the
complete disc or a program simply by starting the source.
- RECORD TRACK - to make an synchronized recording of a
single track simply by starting the source.
- REC(ord) MANUAL - to manually start a recording simply by
pressing the RECORD key.
- MAKE CD - to make a synchronized recording of the
complete disc or a program simply by starting the source.
Finalizing will be done automatically (active for digital
recordings).
Some remarks on recording:
- When AUTO TRACK is ON ( default setting), track numbers
will automatically be increased during recording.
- By programming the source first, a compilation can be
recorded.
- If a finalized CD recordable disc is inserted into the CD
recorder,
FINALIZED CD will be displayed when REC
TYPE is pressed. Recording will not be possible.
- If a finalized CD rewritable disc is inserted in the CD
recorder,
UNFINALIZE and PRESS ENTER will be
displayed when the REC TYPE is pressed. If ENTER is
pressed, the disc will be unfinalized.
REM TRACK TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
SYNC MANUAL RECORD
REM TOTAL
ALL
TRACK
TIME STEP TRACK
Recording modes Remarks about recording
RECORDING