beautypg.com

Recording, English, Important – Philips CDR770BK User Manual

Page 12: Autostart recording

background image

English

18

This feature enables you to make fast and easy recordings of
a CD. Track increments are automatically detected from the
source material. Track increments cannot be added manually.
In analog source material a silence of 2.7 seconds or more is
automatically detected as a track increment.

Important:
- Recording from CD-changers should always be started in

the RECORD DISC, RECORD TRACK or MAKE CD mode.

Preparing for autostart recording

1 Make sure the disc is absolutely free of scratches and dust

particles.

2 Press Source repeatedly until (depending on the connection

used):
➜ DIGITAL I, OPTICAL I or ANALOG lights up and

DIGITAL 1, OPTICAL or ANALOG will appear on
the display.

3 With the CD recorder stopped, press REC TYPE

once:

to select '

RECORD DISC';

twice:

to select '

RECORD TRACK';

four times: to select ‘

MAKE CD’ (active for digital

recordings).

➜ d and

SYNC

start to flash and the display shows the

selection.

• If

CHECK INPUT message also flashes, the digital

connection is incorrect.

Start recording

1 To start recording, press Play on the selected source.

➜ The CD recorder automatically starts to record and d

lights continuously.

• If, however, you start the source during a track, recording

will start at the beginning of the next track or after 2.7
seconds of silence in analog recordings.

• To check the elapsed recording time, press DISPLAY.

(This can also be done during recording.)

• The EASY JOG/ENTER key can be used to adjust the

recording level.

• The recorder stops automatically.

2 To stop recording manually, press STOP on the CD recorder.

UPDATE lights up and

SYNC

and d go out.

• If STOP 9 is pressed within 3 seconds after pressing PLAY,

no recording will take place.

• To interrupt recording, press PAUSE on the CD recorder.

➜ d starts to flash. (Autostart recording is disabled.) To

resume, press RECORD on the CD recorder.

After recording the display will show

UPDATE for several

seconds.

Note:
- Recordings from DAT, DCC or analog sources will only stop

after 20 seconds of silence.

- Auto track is always active.

Important:

If you want to play the recorded CDR disc on a regular
CD player, it must be finalized. See finalizing discs.

Finalized CDRW discs play only on CDRW compatible
CD players.

REM

TRACK

TIME

DIGITAL

OPTICAL
ANALOG

PROG
SHUFFLE
REPEAT
SCAN

I

I

CD

RW

SYNC MANUAL

RECORD

REM

TOTAL

ALL

TRACK

TIME

STEP

TRACK

REM

TRACK

TIME

DIGITAL

OPTICAL
ANALOG

PROG
SHUFFLE
REPEAT
SCAN

I

I

CD

RW

SYNC MANUAL

RECORD

REM

TOTAL

ALL

TRACK

TIME

STEP

TRACK

AUDIO CD RECORDABLE/REWRIT

ABLE

OPEN / CLOSE

PLAY / PAUSE

STOP

REC

TYPE

Recordable

ON / OFF

OPEN / CLOSE

PLAY / PAUSE

STOP

SOURCE

ERASE

FINALIZE

AUDIO CD RECORDABLE/REWRIT

ABLE

DISPLAY

RECORD

PHONES

INFRA RED

EASY JOG

STORE/

MENU

PHONES

INFRA RED

EASY JOG

STORE/

MENU

ENTER

CANCEL/

DELETE

Autostart recording

RECORDING

This manual is related to the following products: