Philips BDS4621-27 - Manual (Page 48)

1. SERIAL COMMUNICATION PROTOCOL (RS-232)
This serial communication protocol can be used
to control the BDS4621 plasma display remotely
through the serial RS232C port.This information
is provided as is.
Philips cannot accept any liability for damages
or malfunctioning of the display caused by
operation through the serial port.
The external communication protocol include
two parts:
• setup connecting,
• send command.
Default Serial Port:
Baud Rate:
19200
Parity: none
Data bits: 8
Stop bits: 1
Flow Control: none
1.1. Setup Connecting
A typical Packet transaction session is shown in
Figure 1
Figure 1
48
User Manual BDS4621
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 48