Philips BDS4621-27 - Manual (Page 17)

Inserting of Remote Control Batteries
• Turn the remote control upside down, press
and slide off the battery cover.
• Insert two AA batteries in the remote
control as shown in the diagram. (Positive +
and negative polarities - must match the
markings in the compartment).
• Place the cover in reverse order until the
lock snaps.
Scope of Remote Control
• Be sure the remote control is pointed
towards the remote control window on the
display.
• No obstacles should be placed between the
remote control and the remote control
window.
• The effective receiving scope for the signal is
10 meters to the front of the remote
control window, and 30 degrees to the left
or right side and 20 degrees above or below
the control window.
Use of Remote Control
• To ensure a normal operation, the remote
control should not be dropped or damaged
in any way. It should also be kept dry and
away from all heat sources.
• Battery replacement is necessary when the
remote control acts inconsistently or stops
operating the Plasma Display.
17
User Manual BDS4621
10m Front
Right Left
30° 30°
POWER
MENU
INPUT MTS PC
WIDE PIP FREEZE AUTO
CH
VOL
VIDEO
EXIT
1 2
+ -
3 4 5 6 7 8 9 0 100
ZOOM
RETURN
FULL WHITE WOW MUTE DISPLAY MENU
Upper
20°
Lower
20°
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 17