Philips BDS4621-27 - Manual (Page 10)

5. NAMES AND FUNCTIONS OF PARTS
5.1 Sideview
1 Power switch.
2 Power cable.
3 Power jack.
4 Power outlet on the wall.
• Connect the power cable to the product,
then connect the main plug into the wall
outlet.
Note: Power plug types vary between
countries.The power plug shown
may not be the type supplied with
your set.
• Push the power switch (0 = OFF / 1 = ON ).
The power indicator on the front of the
panel should now display red, indicating that
the Plasma Display is in standby mode.
10
User Manual BDS4621
1
2
3
4
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 10