Philips MX5500D-99 - Manual (Page 35)

33
English
Setting the digital output
Set Digital Output according to your optional
audio equipment connections.
Follow the steps of “Using the Setup Menu” and
select :
> Digital Output
Off
All
PCM only
Set Digital Output
Digital Output
Analog Output
Night mode
Speakers
Speaker Layout
PCM Output
Off
Select this to deactivate the digital output.
All
Select this if you have connected the digital
output to an optional piece of audio equipment
that has a multichannel decoder.
PCM only
Select this if the optional audio equipment is not
capable of decoding multichannel audio. After
that, proceed to “Setting the PCM output.”
Once you select ‘PCM only’, the surround mode
will automatically change to ‘STEREO’.
Setting the PCM output
Set your PCM (Pulse Code Modulation) output
only after you have set the system’s Digital
Output to ‘PCM only.’ (See “Setting the digital
output”.)
Follow the steps of “Using the Setup Menu” and
select :
> PCM Output
48 kHz
96 kHz
Set PCM output to 48K or 96K
Digital Output
Analog Output
Night mode
Speakers
Speaker Layout
PCM Output
48 kHz
Select this if the optional audio equipment is
incapable of processing 96 kHz digital signal
input. The signal will then be converted to a
standard signal with sampling rates of 48 kHz.
96 kHz
Select this if the optional audio equipment is
capable of processing digital signal input with
sampling rates of 96 kHz. However, if the sound
output is distorted or there is no sound, select
‘48 kHz’ instead.
DVD Menu Options