Philips MX5500D-99 - Manual (Page 23)

21
English
Step 3: Setting the TV
IMPORTANT!
Make sure you have completed all the
necessary connections. (See pages 12-13
“Connecting TV”.)
1
Adjust SOURCE control until “DISC X”
appears on the display panel (or press
DISC/MEDIA on the remote.)
2
Turn on the TV and set to the correct video-in
channel. You should see the blue Philips DVD
background screen on the TV.
➜
Usually this channel is between the lowest
and highest channels and may be called FRONT,
A/V IN, or VIDEO. See your TV manual for more
details.
➜
Or, you may go to channel 1 on your TV, then
press the Channel down button repeatedly until
you see the Video In channel.
➜
Or, the TV remote control may have a button
or switch that chooses different video modes.
➜
Or, set the TV to channel 3 or 4 if you are
using an RF modulator.
Changing the NTSC/PAL setting via
the remote control
TV/AV
DISC/
MEDIA TUNER AUX/DI
4 5 6
1 2 3
1 2 ,
1
Press DISC/MEDIA on the remote to enter
disc mode.
➜
Make sure no MP3 or picture (Kodak, JPEG)
disc is in disc tray 1.
➜
Wait until the system finishes reading the
discs before proceeding to next step.
If playback begins, press Ç to stop playback.
2
Press and hold DISC/MEDIA on the remote
until “PAL” or “NTSC” appears on the display
panel.
➜
To change the setting, repeat step
2
.
Selecting the color system that
corresponds to your TV
This DVD system is compatible with both
NTSC and PAL. In order for a DVD to play on
this DVD system, the color system of the DVD,
the TV and the DVD system should match.
1
In disc mode, stop playback and press SYSTEM
MENU.
2
Select icon and press 4.
3
Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
Move to and press 2.
Move to ‘TV System’ and press 2.
Auto – Select this if the connected TV is
compatible with both NTSC and PAL (multi-
system.) The output format will follow the
video signal of the disc.
NTSC – Select this if the connected TV is
NTSC system. It will change the video signal of a
PAL disc (VCD only) and output to NTSC
format.
PAL – Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4
Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
SETUP MENU ➠
Auto
NTSC
PAL
Set TV system
TV Shape
TV System
Video Output
Screen Saver
DISC MENU SYSTEM MENU
SEATING ZOOM
PREV NEXT
STOP PLAY/PAUSE
OK
2 3 ,
4
1
Getting Started