Philips MX5500D-99 - Manual (Page 27)

25
English
Basic playback controls
Pausing playback
●
Press ÉÅ.
➜
To resume normal playback, press ÉÅ
again.
Selecting another track/chapter
●
Press S / T or use the numeric
keypad (0-9) to key in a track/chapter number.
Searching backward/forward
●
Press and hold S / T, then press ÉÅ to
resume normal playback.
➜
While searching, pressing and holding
S / T again will increase the search speed.
Selecting next disc
●
Press DISC SKIP.
➜
The selected disc will play once, then stop.
Stopping playback
●
Press Ç.
Resuming playback from the last
stopped point (DVD/VCD)
●
In stop mode and when the disc has not been
ejected, press ÉÅ.
To cancel the resume mode
●
In stop mode, press Ç again.
Notes:
– Opening the current disc tray or selecting
another disc tray will cancel the resume feature.
– Resume option may not be available on some
discs.
Replacing discs without interrupting
playback
●
Press OPEN•CLOSE
0 buttons of the
inactive disc trays.
For example, if currently disc tray 1 is playing,
you can replace the discs on disc trays 2~5.
Disc Operations
buttons on
front panel DVD system’s
display panel
Turning on/off auto Eco standby mode
This is a power-saving feature, the system will
automatically switch to Eco standby mode if you
do not press any buttons within 30 minutes
after a disc has stopped playing.
1
2
STANDBY- ON
STOP
13:38
AUTO ECO ON
1
Press and hold STANDBY ON to switch the
system to standby mode.
➜
The clock appears.
2
Press and hold Ç until “AUTO ECO ON”
appears.
➜
To turn off the setting, repeat step
2
until
“AUTO ECO OFF” appears.
Using the Disc Menu
Depending on the disc, a menu may appear on
the TV screen once you load in the disc.
To select a playback feature or item
●
Use the joystick (1 2 3 4) or numeric
keypad (0-9) on the remote, then press ÉÅ
or OK to start playback.
To access or remove the menu
●
Press DISC MENU on the remote.
For VCD with Playback Control (PBC)
feature (version 2.0 only)
●
In stop mode, press DISC MENU to toggle
between ‘PBC ON’ and ‘PBC OFF’, then the
playback will start automatically.
➜
If you select ‘PBC ON’, the disc menu (if
available) will appear on the TV. Use the Joystick
(1 2 34) to highlight your selection and press
OK to confirm or use the numeric keypad (0-9)
to select a play option.
●
During playback, pressing DISC MENU will
return to the menu screen (if PBC is on).