Brother HL-4050CDN EN - Manual (Page 92)

Control Panel
83
4
LAN for HL-4070CDW users
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired TCP/IP BOOT Method Auto */Static/RARP/BOOTP
/DHCP
Choose the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000) *
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000) *
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000) *
Enter the Gateway address.
IP Boot Tries # (3*)
APIPA On */Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 On/Off *
Ethernet Auto */100B-FD/100B-HD/
10B-FD /10B-HD
Chooses Ethernet link mode.
Set to
Default
Restores wired network settings of the internal print server to default.
Wired
Enable
On */Off Chooses Ethernet link mode.
WLAN TCP/IP BOOT Method Auto */Static/RARP/BOOTP
/DHCP
Choose the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000) *
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000) *
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000) *
Enter the Gateway address.
IP Boot Tries # (3*)
APIPA On */Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 On/Off *
Setup WLAN Setup Wizard
SecureEasySetup
The default settings are shown in Bold with an asterisk.