Brother HL-4050CDN EN - Manual (Page 157)

Troubleshooting
148
7
Jam MP Tray (paper jam in the MP tray)
7
Jam MP Tray
If a paper jam occurs inside the MP tray, follow these steps:
a
Remove the paper from the MP tray.
b
Remove any jammed paper from in and around the MP Tray.
c
Fan the paper stack, and then put it back in the MP tray.
d
When loading paper in the MP tray, make sure that the paper stays under the maximum paper height
guides on both sides of the tray.
e
If the printer does not automatically start printing, press Go.
Jam Tray 1 / Tray 2 (paper jam inside the paper tray)
7
Note
The LCD names for the paper trays are as follows.
• Standard paper tray: Tray1
• Optional Lower tray: Tray2
Jam Tray1
Jam Tray2
If a paper jam occurs inside the paper tray, follow these steps: