Brother HL-4050CDN EN - Manual (Page 88)

Control Panel
79
4
Priority
MP>T1 */T1>MP
When Tray Use is chosen as Auto: Chooses the
order in which the printer uses the paper trays that
contain paper of the same size.
only>
(For no Tray2 installed)
MP>T1
*/T1>MP
(For Tray2 installed)
MP>T1>T2
*/MP>T2>T1>/T1>T2
>MP/T2>T1>MP/T1>T2/T2>T1
/T1>MP>T2/T2>MP>T1
MP First Off */On Chooses whether to feed paper from the MP tray as
a priority.
Duplex
(HL-4050CDN/
HL-4070CDW only) Off */On(Long Bind)/
On(Short Bind)
Chooses whether to automatically print on both
sides of the paper.
MP Size Any */Letter/Legal/A4... Choose the size of paper you put in the MP tray.
Tray1 Size Any */Letter/Legal/A4... Choose the size of paper you loaded in the
standard paper tray.
Tray2 Size
(HL-4050CDN/
HL-4070CDW only)
Any */Letter/Legal/A4... Choose the size of paper you loaded in the optional
lower tray.
General Setup
Submenu Menu Selections Options Descriptions
Local Language English */Français... Changes the LCD language for your
country.
Ecology Sleep Time 0 /1/2/3/4/5*.../ 240 Min Sets the time to return to Power Save
mode.
Toner Save On /Off* Increases the page yield of the toner
cartridge.
Panel Control Button Repeat 0.1 */0.4/0.6/0.8/1.0/1.4
/1.8/2.0 Sec
Sets the time for the LCD message to
change when holding the + or -
button at intervals.
Message Scroll Level 1 */Level 2.../
Level 10
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
LCD Contrast -nnonn+ Adjusts the contrast of the LCD.
Auto Online On */Off Return to Ready state automatically.
The default settings are shown in Bold with an asterisk.
Paper Tray (continued)
Submenu Options Descriptions
The default settings are shown in Bold with an asterisk.