Brother PT-2730 - Manual (Page 82)

TROUBLESHOOTING
75
Error Messages
Tape Width
Limit!
Max 2 Lines * There are more than two lines of text when you press the
Print or Preview key while using 0.35" or 0.23" (9 mm or 6
mm) tape. Limit the number of lines to two, or replace with a
larger width tape cassette.
Tape Width
Limit!
Max 1 Line * There is more than one line of text when you press the Print
or Preview key while using 0.13" (3.5mm) tape. Limit the
number of lines to one, or replace with a larger width tape
cassette.
Block Limit!
Max 5 Blocks * There are already five blocks of text. Limit the number of
blocks to five.
Text Full! * The maximum number of characters have already been
entered. Edit the text and use fewer characters.
Length Limit! * The length of the label to be printed using the text entered is
longer than 39.37" (1 m). Edit the text so that the length of the
label is less than 39.37" (1 m).
Insert
0.94" Tape
Cassette! * An 0.94"(24mm) tape cassette is not installed when an Auto-
Format for 0.94"(24mm) tape is selected. Install an
0.94"(24mm) tape cassette.
Insert
24mm Tape
Cassette! *
Insert
0.70" Tape
Cassette! *
An 0.70" (18 mm) tape cassette is not installed when an
Auto-Format for 0.70" (18 mm) tape is selected. Install an
0.70" (18 mm) tape cassette.
Insert
18mm Tape
Cassette! *
Insert
0.47" Tape
Cassette! *
An 0.47" (12 mm) tape cassette is not installed when an
Auto-Format for 0.47" (12 mm) tape is selected. Install a
0.47" (12 mm) tape cassette.
Insert
12mm Tape
Cassette! *
Message Cause/Remedy
*Press any key to clear the error message.