Belkin F5D9630UK4A - Manual (Page 50)

49 48
Manually Configuring your Router
49 48
Manually Configuring your Router
Connecting your Computer to a Wireless Network that Requires
WPA-PSK (no server)
1.
Double-click the “Signal Indicator” icon to bring up the “Wireless
Network” screen. The “Advanced” button will allow you to view
and configure more options of your wireless card.
2.
Under the “Wireless Networks” tab, select a network name from
the “Available networks” list and click “Configure”.
3. Under “Network Authentication” select “WPA-PSK (No Server)”.
4.
Type your WPA key in the “Network key” box.
Important:
WPA-PSK is a mixture of numbers and letters from A–Z
and 0–9. For WPA-PSK you can enter eight to 63 characters. This
Network key needs to match the key you assign to your Wireless
Router or access point.
5.
Click “OK” to save the settings.