Brother UNINET 1240 User Manual

Page 7

UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE OPC CARTRIDGE

11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • [email protected]

© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.

USA

+1-310-280-9620
+1-310-838-7294

Ph:
Fx:

JAPAN

+81-3-44-55-2789
+1-310-838-7294

EUROPE

+34-93-757-1335
+34-93-741-4166

BRAZIL

+55-11-4822-3033
+55-11-4822-3353

ARGENTINA

+54-11-4571-2388
+54-11-4574-3706

www.

u n i n e t

imaging.com

OPC CARTRIDGE

1. With a medium size Phillips screwdriver
remove the screws securing the corona wire
assembly. There are two in each corner hold-
ing the plastic top and one, visible thru the
hole on the right hand side securing the elec-
tric contact of the control grid and the clean-
ing felt.

2. Press the four tabs to remove the assembly
from the top of the cartridge starting from the
two behind followed by the ones on each side.

3. Clean the grid surface of any toner with
compressed air.