Brother UNINET 1240 - Manual (Page 5)

UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • [email protected]
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
USA
+1-310-280-9620
+1-310-838-7294 Ph:
Fx:
JAPAN
+81-3-44-55-2789
+1-310-838-7294
EUROPE
+34-93-757-1335
+34-93-741-4166
BRAZIL
+55-11-4822-3033
+55-11-4822-3353
ARGENTINA
+54-11-4571-2388
+54-11-4574-3706
www. u n i n e t imaging.com
7. Lift the developer roller from the hopper.
NOTE: Clean the roller using a clean lint free
cloth. DO NOT USE any solvent or chemicals
on the developer roller. 8. Remove the fill plug from the hopper.
9. Discharge any toner from the toner hopper. Use dry compressed air or a vacuum to THOROUGH-
LY clean out the toner hopper. Clean the developer blade using a dry lint free cloth.
NOTE: DO NOT attempt to re-use any of the toner remaining in the cartridge and DO NOT complete
the charge by adding new or unused toner from another old cartridge.
NOTES