Philips SENSEO® Latte Duo Kaffeepadmaschine - Manual (Page 8)

8
D Note:
You can adjust the height of the drip tray
or remove the drip tray to be able to place
higher cups.
D Note
The cups you use should have a capacity of at
least 150ml when you brew regular coffee or
100ml when you brew strong coffee. Do not
use cups that are too large, as they cause the
coffee to get cold more quickly.
9
Press the button with two coffee beans for a
regular cup of coffee. Press the button with
three coffee beans for a strong cup of coffee.
10
Press the recipe button once for one cup of
coffee or twice for two cups of coffee.
11
When the water has heated up and the on/
off button lights up continuously, the machine
automatically starts brewing coffee.
D Note:
Do not remove the water reservoir during a
brewing cycle.
12
When the coffee is ready, remove the used
coffee pod or pods. Simply lift the pod holder
out of the machine and empty it.
C Caution:
There may still be some hot water/coffee on
the coffee pod or pods.
13
After use, press the on/off button to switch
off the machine.
6
Place 1 coffee pod in the 1-cup pod holder
q (1) or place 2 coffee pods in the 2-cup
pod holder qq (2). Place the pod or pods
properly in the centre of the pod holder, with
the convex side pointing downwards. Press
the pod or pods lightly into the pod holder.
D Note:
Make sure the coffee in the pod or pods is
evenly distributed.
C Caution:
Never put normal ground coffee or use torn
pods in the SENSEO ® machine, as this causes
it to become blocked.
7
Close the lid and lock the lever.
8
Place one cup or two cups under the spout
openings. Use the markings on the drip tray to
place the cup or cups.