Philips SENSEO® Latte Duo Kaffeepadmaschine - Manual (Page 17)

17
2
Press the CALC button to start the flushing
cycle. The water flows continuously for
approximately 5 minutes.
3
Wait until the machine has completed the
flushing cycle. The on/off button flashes quickly
and the CALC button flashes slowly.
4
Empty the bowl and place it back under the
spout.
5
Repeat steps 1 to 4 twice to complete the
flushing procedure. When the last flushing
cycle is complete, the machine switches off
automatically.
10 Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the
worldwide guarantee leaflet for contact details).
11 Environment
• Do not throw away the machine with the
normal household waste at the end of its life,
but hand it in at an official collection point for
recycling. By doing this, you help to preserve
the environment.
6
The machine is ready for descaling when
the on/off button and CALC button light up
continuously. Press the CALC button until the
machine beeps twice to start the descaling cycle.
7
The descaling cycle is in progress. During the
descaling cycle, the descaling solution comes
out of the machine in intervals. During the
last 5 minutes the descaling solution flows
continuously.
B Warning:
Do not interrupt the descaling cycle.
8
When all the descaling solution in the water
reservoir has been used up after approximately
50 minutes, the on/off button flashes quickly
and CALC button flashes slowly.
9
Empty the bowl and place it back under the
spout.
10
Remove the used coffee pod from the pod
holder.
9.1.1 Flushing cycles:
1
Rinse and fill the water reservoir with fresh
water until the MAX indication. Place it back
onto the machine.
ENGLISH