Philips SENSEO® Latte Duo Kaffeepadmaschine - Manual (Page 16)

16
4
Place the 1-cup pod holder q with a used
coffee pod in it in the machine. Close the lid
and make sure it is properly locked.
D Note:
Always put a used coffee pod in the pod
holder when you descale the machine. This
pod serves as a ‘filter’ to prevent the sieve or
hole in the pod holder from getting clogged
with scale residue.
B Warning:
Make sure the lid is closed properly and the
lid lever is locked before you start descaling
the machine.
5
Put a bowl with a capacity of at least 1 litre
under the spout to collect the descaling
solution.
B Warning:
Make sure you place the milk spout for proper
descaling.
D Note:
You can always descale your machine before the
appliance indicates it is necessary, follow the steps
below.
1
Mix the descaler with 1 litre of water in
a measuring jug. Stir until the powder has
dissolved. Fill the water reservoir with the
descaling solution.
2
Tilt the water reservoir and place the bottom
back onto the machine (1). Then press the top
of the water reservoir towards the machine (2).
3
Press the on/off button. The on/off button
flashes slowly while the water heats up. The
machine is ready for descaling when the on/
off button lights up continuously.