Philips SENSEO® Latte Duo Kaffeepadmaschine - Manual (Page 6)

6
7
Put the plug in an earthed wall socket.
8
Press the on/off button. The button lights up
to indicate that you have to flush the machine.
9
To start flushing, press any of the recipe
buttons.
• During the flushing cycle, the boiler fills itself
with water from the water reservoir and
cold water comes out of the coffee spout.
During the flushing cycle, the machine
produces more noise than during a regular
brewing cycle.
3
Tilt the water reservoir and place the bottom
back onto the machine (1). Then press the top
of the water reservoir towards the machine (2).
4
Slide the milk spout onto the machine. Make
sure you attach the milk spout by sliding it
over the guiding rails on the coffee spout. You
hear a click sound when the spout is attached
properly.
5
Place a bowl with a capacity of at least 1 litre
under the coffee spout.
6
Make sure a pod holder, without pod or pods,
is in place.